Deep immersion device product introductionIPX8 deep immersion devices are divided into three types, namely diving test device, pressure immersion test
Free QuoteIPX8 deep immersion devices are divided into three types, namely diving test device, pressure immersion test device, and water immersion test device.
All three devices belong to the continuous immersion test, which simulates the water pressure environment to test whether the item can meet the requirements in deep water.
IPX8 deep immersion device main fields are suitable for outdoor lighting, outdoor lamps, household appliances, communication products, signal devices and automotive lamps and other products
The device can simulate water depths of 30 meters, 50 meters, and 100 meters. Welcome to inquire
In a sealed container, by pressurizing the air, the compressed air can generate pressure on the water body, thereby simulating the corresponding water depth environment.
| Model | NK-IPX8-50 |
| Inner dimension | Φ800*H1200mm |
| External dimensions | φ1000*H1800mm |
| Inner wall thickness | 6mm |
| Test water depth range | 0-50m |
| Pressure adjustment range | 0.08Mpa-0.5Mpa |
| Safety valve exhaust pressure | 0.55Mpa/ 5.5bar |
| Pressure error value | ±0.0002Mpa |
| Intake adjustment method | Automatic adjustment pressure valve |
| Voltage | 220V 50Hz single phase 3 wires system |
| Stress test method | Pressure Sensor |
| Pressure control method | Automatic adjustment |
The tank body is made of 304 stainless steel, stainless steel sealed container tank, and the pressure value is detected by an electronic pressure gauge. The water level gauge accurately displays the water volume, using the accuracy of the test results.
The market usually uses a button-type, old-fashioned control method. The high-definition touch screen of the IPX8 deep immersion device produced by Noki can accurately display the test data.
The pressure sensor is used to sense the pressure, and the feedback signal is sent to the air supply device to ensure that the water pressure is constant within the set range;
Pressure display mode: digital special water depth gauge displays the pressure value of the internal water (or displayed as a few meters of water depth, direct reading value);
Protection: multiple protection modes such as top pressure switch protection, intake end protection, and overpressure protection;
Two-way digital display of water temperature and sample temperature.
GB/T 4208-2017 Protection class of enclosure (IP code)
GB/T 2421.1-2008 Environmental Testing of Electrical and Electronic Products - Overview and Guidelines
GB/T 2423.37-2006 Environmental testing of electrical and electronic products - Part 2: Test methods Test L: Sand and dust test
IEC 60529:2013. IDT
IEC 60068-1:1988. IDT
IEC 60050-195:1998 International Electrotechnical Terminology Part 195: Earthing and Protection against Electric Shock
IEC 60050(826):1982 International Electrotechnical Terminology Chapter 826: Electrical installations in buildings
IEC 60071-2:1996 Insulation coordination - Part 2: Guidelines for use
1. Do not add more water to the tank than about 3/4 of the volume of the tank. According to the size of the test sample, the water should not overflow the overflow.
2. The bolts on the tank should be locked diagonally. Repeat on both sides.
3. Do not open the bolts while the test is in progress.
4. After the test, look at the value on the pressure display, and it can be opened only if it is lower than 0.003MPa.
5. Set the pressure value during the test, do not exceed the specified pressure, for example: IPX8 pressure immersion test machine (50 meters), the pressure value cannot exceed 0.5MPa.
6. If it is found that the displayed value of the pressure controller exceeds the rated pressure holding value, please press the emergency stop button in time.
AC220V 50HZ Single-phase three-wire system, single-phase 220V
Can adapt 110V, 230V, 240V, 360V, 380V, 415V, etc
