IPX56 water spray test chamber device

IPX56 water spray test chamber device product introduction

Compared with the box-type structure, the IPX56 water spray test device is relatively simple. The two nozzles of the IPX56 water spray test device need to be held by the operator or fixed to the bracket, and the distance from the turntable is 2.5-3 meters. Requirements, first of all, your venue must be large enough, with a test distance of 2.5-3 meters. Secondly, the site must have the ability to treat wastewater. The IPX56 water spray test device cannot recycle water, and it must be drained in time to avoid water deposition.

IPX56 water spray test device is mainly used in outdoor lamps, household appliances, auto parts and other electronic and electrical products.

The working principle of IPX56 water spray test chamber device

When the IPX56 water spray test device is testing the object, the sample is placed on the turntable. When the test is started, the water flow is controlled by the pressure gauge and the flow meter, and is sprayed to the test object through the nozzle.

According to the national standard requirements:

The nozzle diameter of the IPX5 water spray test device is 6.3mm, and the water flow rate is 12.5±0.625L/min. The time of spraying water per square meter on the surface of the test object is 1min, and the minimum test is 3min.

The nozzle diameter of the IPX6 water spray test device is 12.5mm, and the water flow rate is 100±5L/min. The IPX6 water spray test device belongs to strong water spray and has certain pressure requirements.

Water spray test chamber Noki standard datasheet

IPX56 water spray test chamber device product structure

The water spray test device is made of 304 stainless steel as a whole, which is anti-corrosion.

The equipment is equipped with a water tank as standard, which can recycle water, and there is no need to build a waterproof test room. There are high and low water level alarm monitoring in the water storage tank, which can effectively prevent the water pump from being damaged due to lack of water.

The turntable is made of SUS304 stainless steel, which is not easy to rust. The fixed turntable can be raised and lowered.

The spray gun is hand-held, with a pressure gauge and switch on the spray gun. It is convenient for the operator to adjust.

The electronic pressure gauge displays the pressure of the test grade to ensure the accuracy of the test results.

The equipment is equipped with a Foma wheel as standard, which can move freely and has a foot cup, which can be fixed.

IPX56 water spray test chamber device application standard

GB/T 4208-2017 Protection class of enclosure (IP code)

GB/T 2421.1-2008 Environmental Testing of Electrical and Electronic Products - Overview and Guidelines

GB/T 2423.37-2006 Environmental testing of electrical and electronic products - Part 2: Test methods Test L: Sand and dust test

IEC 60529:2013. IDT

IEC 60068-1:1988. IDT

IEC 60050-195:1998 International Electrotechnical Terminology Part 195: Earthing and Protection against Electric Shock

IEC 60050(826):1982 International Electrotechnical Terminology Chapter 826: Electrical installations in buildings

IEC 60071-2:1996 Insulation coordination - Part 2: Guidelines for use