IPX34 water spray test chamber device

IPX34 water spray test chamber device introduction

The IPX34 water spray test chamber device has two forms: swing tube type and shower type. The swing tube type is a column type, and there are two columns supporting the swing of the swing tube. Compared with the box-type pendulum tube, the open pendulum tube rain test device is not limited by the chamber body, and the pendulum tube can be made to the maximum radius.

At the same time, there are certain requirements for the test site. First of all, the site should have enough space for the swing pipe to swing back and forth, and secondly, it should have the function of treating wastewater.

The shower-type rain test device is also called a hand-held rain test device. The operator can test the item by holding it in his hand. It can be seen that the rain shower test device does not have high requirements on the site, does not take up too much space, and saves costs.

IPX34 rain shower device is mainly used in electronics, electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products

The difference between swing tube type and shower type

There is still a certain difference between the swing tube type and the shower type in the IPX34 rain test chamber device.

1. The shower-type rain test chamber device mainly tests products with a relatively large volumes. When the test object is too large, the maximum radius of the swing pipe can only be up to 1600mm, (the pipe will be thicker), there is no way to fully water the test object, but the shower type rain shower device will not be limited, it can be Have the operator take the shower to test the test object.

2. The shower-type rain shower test chamber device saves more space than the swing-tube rain shower device, does not take up too much space, and saves costs.

3. The swing-tube rain test chamber device can evenly rain the test object by swinging the swing tube. However, the rain shower device may have some errors and will not test the items uniformly in all directions.

4. The rainfall of the swing-tube rain shower device, the rotation angle of the test rack, the swing angle of the water spray swing tube and the swing frequency of the swing tube can be adjusted automatically. However, a rain shower can't do that.

IPX34 water spray test chamber device working principle

When the IPX34 is testing the product, the sample is placed on the turntable of the test device. After the test device is started, the water flow controls the water output through the flow meter and pressure, and enters the swing pipe through the water pipe. According to the test requirements, the pendulum tube swings back and forth to pour water into the test object.

When IPX3 is testing the item, the pendulum tube swings 60° on both sides of the vertical line, a total of 120°. Each swing takes 4s. The test lasted 5 minutes. Then rotate the shell 90° in the horizontal direction and test for 5min.

When testing items with IPX4. the water spray holes should be covered within 180° of the semicircle of the pendulum tube. The test time is the same as IPX3.

Parameters that water spray test chamber device got

Parameters is only Noki standard chamber devices, Noki do accept OEM orders

IPX34 water spray test chamber device parameters

IPX34 water spray test chamber device product structure

The rain test chamber device is made of 304 stainless steel as a whole, with beautiful appearance, anti-corrosion and durability.

The turntable is made of SUS304 stainless steel, which has a large load-bearing capacity and is not easy to rust. The turntable also has casters, which can move freely. Adjustable height due to different heights of test items.

The control panel adopts a 7-inch high-definition touch display. If customers need to detect IPX12 at the same time, they can share a control system with IPX34.

The equipment has its own water tank, pressure gauge, flow meter, and Foma wheel, which can be adjusted at any time through the control cabinet.

IPX34 water spray test chamber device standard

GB/T 4208-2017 Protection class of enclosure (IP code)

GB/T 2421.1-2008 Environmental Testing of Electrical and Electronic Products - Overview and Guidelines

IEC 60529:2013. IDT

IEC 60068-1:1988. IDT

IEC 60050-195:1998 International Electrotechnical Terminology Part 195: Earthing and Protection against Electric Shock

IEC 60050(826):1982 International Electrotechnical Terminology Chapter 826: Electrical installations in buildings

IEC 60071-2:1996 Insulation coordination - Part 2: Guidelines for use

Maintenance method of water spray test chamber device

The rain test device is exposed to the environment for a long time, and the instruments, switchboards, water circuits, etc. in the power distribution room will collect dust. When the air is humid, it will cause equipment failure. To ensure long-term stable operation of the equipment, the power distribution room is Clean once.

Power supply

AC220V 50HZ Single-phase three-wire system, single-phase 220V