IPX1/2 drip test chamber device

Product introduction of IPX1/2 drip test chamber device

The IPX1/2 drip test chamber device can achieve the same test effect as the IPX1/2 dripping test chamber, but different from the IPX1/2 dripping test chamber, the IPX1/2 drip test device adopts an open structure. Two wall-mounted types;

Because it is an open structure, the IPX1/2 drip test device requires that the working environment must have a certain capacity for wastewater treatment. After the test, the water cannot be recycled and used. stagnant water is formed.

IPX1/2 drip test chamber device is mainly used in lighting, household appliances, electrical and electrical products, communication cabinets, auto parts, mobile smart devices, and other fields.

IPX1/2 drip test chamber device Features

The open IPX1/2 drip test chamber device also has the advantages that the IPX1/2 drip test chamber does not have:

It can be customized according to the customer's test object, and the volume of the product that can be tested will be larger;

The weight of the IPX1/2 drip test chamber device is not as large as that of the text chamber, and the frame is equipped with a universal wheel, which can also be easily moved;

The height of the frame can be easily increased, and the lifting height of the drip board can be higher than that of the IPX1/2 drip test chamber;

The wall-mounted IPX1/2 dripping test chamber device has a simpler structure and can be hung on the wall to save floor space;

The working principle of the IPX1/2 drip test chamber device

When the IPX1/2 drip test chamber device is tested, the sample will be placed on the turntable below the drip test chamber device. After the test device is started, the water flow controls the water output through the flow meter and pressure and enters the drip tray through the water pipe. Water droplets are generated in the needle tube below the drip tray, and drop vertically onto the measured object;

In the IPX1 standard test, the turntable is in a horizontal direction; while in the IPX2 standard test, the turntable needs to be inclined at an angle of 15° in each of the four directions, and the samples are tested separately;

Drip test chamber device Parameters

The drip test chamber device equipment structure

The overall frame of the IPX12 dripping test chamber device is made of aluminum alloy, which is light, durable, and cost-effective.

The control system only has the intelligent touch screen control, which can accurately present the test data, facilitate the man-machine dialogue, and be easy to operate.

The turntable is made of 304 stainless steel, which has the characteristics of strong load-bearing capacity, sturdy and durability, and is not easy to be corroded; the turntable generally needs to be movable and can be tilted in the horizontal direction, etc.; The holes of the test object, and may meet the requirements of the live test of the test object.

And the size and shape can be customized according to the needs of users. Usually, the turntable has certain requirements on the weight of the measured object. If the measured object weighs more than 50 kg, it needs to be customized.

The dripping board of the IPX12 drip test chamber device is mainly composed of a square plate hoisted on top of the equipment and is equipped with an electric hoist that can control the position and height for the control. The dripping board is mainly composed of stainless steel vacuum and needles, which is convenient for simulating the realization of the dripping Effect.

The structure of the raindrop board can be customized according to the actual needs of users. For some customers who do not have too high a requirement on the position, the electric hoist can also be directly fixed on the top of the chamber; the bottom of the raindrop board is usually equipped with protective devices.

The water tank and the control cabinet are integrally formed to reduce the floor space, and it is equipped with a Foma wheel for easy movement.

Application standard of IPX1/2 drip test chamber device

GB/T 4208-2017 Protection class of enclosure (IP code)

GB/T 2421.1-2008 Environmental Testing of Electrical and Electronic Products - Overview and Guidelines

GB/T 2423.37-2006 Environmental testing of electrical and electronic products - Part 2: Test methods Test L: Sand and dust test

IEC 60529:2013. IDT

IEC 60068-1:1988. IDT

IEC 60050-195:1998 International Electrotechnical Terminology Part 195: Earthing and Protection against Electric Shock

IEC 60050(826):1982 International Electrotechnical Terminology Chapter 826: Electrical installations in buildings

IEC 60071-2:1996 Insulation coordination - Part 2: Guidelines for use

Maintenance method of drip test chamber device

1. Before the test, check whether the water tank of the IPX2 raindrop test equipment is dirty. After cleaning the water tank, fill it up with water;

2. Check the filter element of the IPX2 rain drop test equipment, if it is found to be black or blocked, please replace it with a new filter element in time;

3. Manually open the solenoid valve of the IPX2 raindrop test equipment, check the needle on the raindrop board, and replace the blocked or deformed needle;

4. The turntable should be kept in a horizontal position when doing the IPX1 test, and should be tilted 15 degrees when doing the IPX2 test;

5. Enter the manual operation mode, turn on the raindrop solenoid valve, turn the turntable forward, turn the turntable reversely, etc., respectively, and check the operation;

6. Turn on the solenoid valve of the raindrop board to check the water flow regulation;

Spare parts

Needles

Power supply

AC220V 50HZ Single-phase three-wire system, single-phase 220V